Mini Heat Gun, 300W Handheld Hot Air Gun, Portable Electric Heat Tool with 5FT Long Cable for DIY Craft Embossing, Epoxy…

Novamilion Mini Hot Air Gun, 110V 300W Portable Heat Shrink Gun for Embossing Wrapping Paint Drying Crafts Electronics DIY

➦Keeping 5-6cm distance from work and about a 45 degree angle to heat until it is completed. It not only can add its hardness, but also its brightness

➦100% Brand New and High Quality ABS and PC plastic material, it is equipped with the stainless steel bracket to rotate 100 degrees. It is Very compact and durable, practical

➦There are heat vents in left and right sides to decreased the internal temp and extend its lifetime

➦Our excellent compact heat gun can be used for heating shrinkable film, embossed powder, rubber stamp, the best choice to replace toaster or oven and the polymer clay will change into hard and bright after the usage of the gun

➦The temperature can not be adjusted, but in theory, it can reach at about 200 degree within a few seconds abstractly. But do not use it more than 10 minutes, just you’ll turn off then turn on again for working continuously

📕Specification:

Material: Plastic ABS+PC

Cable length: 59.1in /150cm

Rated Power: 300W

Rated voltage: 110v

Size: 230*50mm/9*1.97in

Power: 50-60Hz

Power type: AC power supply

Type: Constant temperature

📣Warning:

-Do not touch with water! Do not touch the hot nozzle.

-Do not use outdoor. Keep it out reach of children. Keep 5-6cm distance between the heat tool and item.

-Do not use more than 10 minutes incessantly to prevent overheated.

-This hot air gun is specially made for DIY, it can’t not use in industry aspect.

📇Package includes:

1 x Hot Air Gun

1 x Manual

Make sure this fits by entering your model number.
🔧 Long Cable Enough for Crafting – 5FT Long Cable !!!!! Hot air shrink gun was made of prime quality stainless steel inside and ABS plastic outside, simple design and durable quality, mini dimensions 230*50mm / 9*1.97in
🔩 Easy To Use – Just keep about 5-6cm distance from your DIY craft and heat it at about a 45 degree angle so that avoiding hurt by it. The temperature can not be adjusted, but it can reach at from 250°C/482°F~350°C/662°F in few seconds which heat up quickly and works like a charm. Note: Please don’t use it more than 10 minutes in one time, just turn off then turn on for working incessantly.
🔧 DIY Essentials Part – If you like DIY, this can be a good accessory for you. Even, you’ll replace toaster or oven and the polymer clay will change into hard and bright after the usage of the heat gun, it can be used for making handmade candle, rubber stamp and so on.
🔩 Suitable For – Our excellent compact heat gun can be used for heating shrinkable film, clay, embossed powder, rubber stamp, remove old painting, heat to shrink film, defrost and remove mud and dirt etc. Built-in stand for self-beef up and table top use.
❤️ Protected and Convenient – The temperature keep an eye on device is arranged in the hot air gun circuit. When the current abnormally rises to a certain height with unusual heat, the temperature keep an eye on cuts off the current itself, which protects the Protected operation of the circuit and eliminates the occurrence of dangerous situations such as high temperature melting and fire. Made of ABS which has some functions such as heat resistance, low temperature resistance and so on; Outlet is made of stainless.